The Keysight (formerly Agilent) 1163A Miniature Passive probe is a small, rugged, resistive divider probe for use with the all Keysight (formerly Agilent) Infiniium oscilloscopes. It is fully compatible with the Keysight (formerly Agilent) AutoProbe interface which completely configures the Keysight (formerly Agilent) Infiniium oscilloscope for the probe. The probe is built and tested for high reliability. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1163A probe comes with a wide range of accessories including an Keysight (formerly Agilent) Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.