COVID-19 Alert: TRS-RenTelco remains open and ready to support you during this challenging time. We have implemented incremental product-cleaning procedures and are following CDC recommended best practices.
Buy Certified Pre-Owned Equipment with 12-months 0% financing
16-Point Certification ProcessRefurbished and Calibrated One Year Warranty
Hover to zoom
Specs and manuals
Two 3.5 Mm Connectors Are Female And Output Connector Is 2.4mm Female On Module
Two 3.5 Mm Connectors Are Female And Output Connector Is 2.4mm Male On Module
Get the industry's first phase calibration standard comb generator for precision nonlinear measurements.
The Keysight U9391F comb generators were developed to provide precision phase calibration for non-linear measurements using the PNA-X nonlinear vector network analyzer (NVNA), referenced to the National Institute of Standards and Technology (NIST) standard. Additionally, the Keysight U9391F comb generators can be used to calibrate PNA and PNA-X network analyzers for phase and delay measurements of frequency converters without requiring reference or calibration mixers.
Keysight's new patented comb generator offers a customer selectable USB controlled frequency divider which allows for broad range of input signal frequencies from 10 MHz to 50 GHz and small minimum tone spacing of 10 MHz. The input power and fundamental frequency have lower sensitivity than other comb generators. So you can calibrate the comb generator at a single input power level and frequency, and then successfully apply the calibration across a wide range of input powers and fundamental frequencies.
When driven with a sine wave input of less than 100 MHz, (e.g. when connected to the 10 MHz reference of a PNA or PNA-X), the U9391-60009 sine-to-square-wave converter is needed to ensure the comb generator produces optimum power levels across the entire frequency range. Therefore, U9391-60009 is included as a standard accessory for U9391C/F/G.
Keysight U9391F Key Features and Specifications:
Rent or Lease