Keysight Technologies 6692A
60V/110A/6600W System Power Supply
The Keysight 6692A high power (6600 Watt) DC supply offers speed and accuracy for test optimization while ensuring no delays on your testing. The ruggedness and durability of the 6692A is built to meet demanding needs of continuous stress testing in tough environments. Designed with built-in margin, the Keysight 6692A can meet the specifications under all conditions and withstand peak stress.
The low output ripple and noise, analog control of output voltage and current, fan-speed control to minimize acoustic noise, as well as built-in measurements and advanced programmable features make the Keysight 6692A a dependable solution. The 6692A has many safety features available to protect your DUT from damaging conditions like overvoltage, overcurrent, over-temperature, and programmable shut-down.
Keysight 6692A - Features and Specifications:
- Output voltage: 0 to 60 V
- Output current : 0 to 110 A
- Low ripple & noise (20 Hz to 20 MHz)
- High accuracy current programming and read back
- Constant Voltage Peak-to-peak: 25 mV
- Parallel connection for more current output
- Analog programming and monitoring
- Constant current with Load Inductance >5H rms: 30 mA Readback Accuracy (from front panel or over
- GPIB with respect to actual output @ 25 /-5C)
- Industry standard SCPI programming commands
- Remote sense
- Electronic calibration
Get the Keysight 6692A for sale or rent from TRS-RenTelco with 24/7 customer support.
Contact us to request a quote today.
- Configurations
- Resources
Base Model
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cover Safety AC
Qty: 1 -
Clamp 1-1/4 in Round Service Entrance for Power Cord AC Cover
Qty: 1 -
Terminal Block 4-Pin Connector note: installed on some units
Qty: 1 -
Connector Terminal 7-Pin
Qty: 1 -
Handle Kit Grey 3 Hole
Qty: 1 -
Handle Kit Grey 2 Hole
Qty: 1 -
Cable Serial-Link Telephone 2 m
Qty: 1 -
Hardware Kit
Qty: 1 -
Machine Screw
Qty: 8 -
Spacer Buss Bar
Qty: 1 -
Washer Flat MTLC for Buss Bar Spacer
Qty: 2 -
Screw Machine M4 0.7 mm x 0.25 mm for Buss Bar Spacer
Qty: 2 -
Washer
Qty: 2 -
Cord Power USA No-Plug 8 awg 4-Wire 2.5 m Input 208 VAC 3-Phase
Qty: 1 -
Cover Safety DC
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
USB Software I/O Libraries, v18.3.29517
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies 6692A Manual
Keysight Technologies 6692A Spec Sheet
