MIL-STD-704 Rev A Through F Test Software / D&E Firmware
DO-160/EuroCAE Test Firmware/DO-160-F Software
187 To 264Vrms, 3 Phase L-L (3 Wire)
IEC61000-4-11 Test Firmware
IEC61000-4-13 Interharmonics Generator
Airbus A350 Test Software
Airbus ABD0100 1.8 Software Suite
Airbus ABD0100 1.8 AMD 24 And A350 Combination Test Software
Airbus AMD24 Test Software Suite
Boeing 787 Test Rev C
Ethernet Interface
Limit Output Frequency To 500Hz Max
Clock/Lock Master
Watt Hour Meter Firmware
Strain Relief for Safety Covers
Qty: 2Crate Shipping
Qty: 1Bushing Rubber
Qty: 2Cable USB2.0-A - USB2.0-B 15 ft
Qty: 1Cover Input/Output
Qty: 1Cover Lid
Qty: 1USB Drive with Software and Manuals
Qty: 1DO 160/EUROCAE Test FIRMWARE/DO-160-F Software
MIL-STD 704 Rev A through F Test Software / D&E Firmware
AIRBUS A350 Test Software
AIRBUS ABD0100 1.8 Software SUITE
BOEING 787 Test REV C
ETHENET Interface
Strain Relief for Safety Covers
Qty: 2Crate Shipping
Qty: 1Bushing Rubber
Qty: 2Cable USB2.0-A - USB2.0-B 15 ft
Qty: 1Cover Input/Output
Qty: 1Cover Lid
Qty: 1USB Drive with Software and Manuals
Qty: 1DO 160/EUROCAE Test FIRMWARE/DO-160-F Software
IEC61000-4-13 Interharmonics Generator
MIL-STD 704 Rev A through F Test Software / D&E Firmware
AIRBUS A350 Test Software
AIRBUS ABD0100 1.8 Software SUITE
BOEING 787 Test REV C
ETHENET Interface
Strain Relief for Safety Covers
Qty: 2Crate Shipping
Qty: 1Bushing Rubber
Qty: 2Cable USB2.0-A - USB2.0-B 15 ft
Qty: 1Cover Input/Output
Qty: 1Cover Lid
Qty: 1USB Drive with Software and Manuals
Qty: 1IEC61000-4-13 Interharmonics Generator
DO 160/EUROCAE Test FIRMWARE/DO-160-F Software
IEC61000-4-11 Test firmware
MIL-STD 704 Rev A through F Test Software / D&E Firmware
AIRBUS A350 Test Software
AIRBUS ABD0100 1.8 Software SUITE
BOEING 787 Test REV C
ETHENET Interface
SCPI command (Elgar simulation)
Strain Relief for Safety Covers
Qty: 2Crate Shipping
Qty: 1Bushing Rubber
Qty: 2Cable USB2.0-A - USB2.0-B 15 ft
Qty: 1Cover Input/Output
Qty: 1Cover Lid
Qty: 1USB Drive with Software and Manuals
Qty: 1AIRBUS A350 Test Software
DO 160/EUROCAE Test FIRMWARE/DO-160-F Software
MIL-STD 704 Rev A through F Test Software / D&E Firmware
AIRBUS ABD0100 1.8 Software SUITE
BOEING 787 Test REV C
ETHENET Interface
LIMIT OUTPUT FREQUENCY TO 500HZ MAX
Strain Relief for Safety Covers
Qty: 2Crate Shipping
Qty: 1Bushing Rubber
Qty: 2Cable USB2.0-A - USB2.0-B 15 ft
Qty: 1Cover Input/Output
Qty: 1Cover Lid
Qty: 1USB Drive with Software and Manuals
Qty: 1Ethernet Interface
Strain Relief for Safety Covers
Qty: 2Crate Shipping
Qty: 1Bushing Rubber
Qty: 2Cable USB2.0-A - USB2.0-B 15 ft
Qty: 1Cover Input/Output
Qty: 1Cover Lid
Qty: 1USB Drive with Software and Manuals
Qty: 1California Instruments CSW5550 Manual
California Instruments CSW5550 Spec Sheet
Content is AI-generated. Verify critical details with manufacturer-provided resources.
The CSW5550 is a combination AC and DC programmable power source with an integrated digital power analyzer, eliminating the need for separate test equipment. By sharing components between the AC/DC source and power analyzer, the CSW provides a cost-effective, integrated solution that avoids cable clutter and removes the need for external digital multimeters, power harmonics analyzers, and current shunts or clamps. All connections are made internally, simplifying test setups.
The CSW5550 delivers 5,550 VA of power in either single-phase or three-phase output configurations. It offers dual voltage ranges: a low range of 0 to 156 Vrms line to neutral, and a high range of 0 to 312 Vrms line to neutral. The unit can deliver 16A at 115V in the 156V range, or 8A at 230V in the 312V range per phase, with the flexibility to parallel up to 6 units for a maximum of 33,300 VA.
Yes, the CSW5550 features a direct-coupled, transformerless design that allows AC and DC on separate phases or even on the same phase. High DC content waveforms up to 312 volts can be created with no derating of output power, even with 100% reactive loads. This eliminates the need for a separate DC supply and enables realistic simulation of real-world power conditions including DC transients for automotive applications.
The CSW5550 can generate output frequencies from DC (0 Hz) to 5 kHz, with specifications applying from DC and 40 Hz to 5 kHz. The frequency accuracy is 0.01% at 25 degrees Celsius with a temperature coefficient of 0.001%/°C. Frequency resolution varies by range: 0.01 Hz from 16 Hz to 81.91 Hz, 0.1 Hz from 81.90 Hz to 819 Hz, and 1 Hz from 820 Hz to 5000 Hz. The maximum slew rate for frequencies greater than 1 kHz is 1 kHz per second.
The CSW5550 is designed to drive difficult nonlinear loads with a crest factor of up to 3.25:1, meaning it can deliver peak currents 3.25 times the RMS output current. Since many modern products use switching power supplies that pull high repetitive peak currents, the CSW5550 can deliver up to 52 Amps of repetitive peak current per phase in the 156V range. This high crest factor capability ensures reliable testing of equipment with switching power supplies.
The built-in power analyzer provides detailed amplitude and phase information on up to 50 harmonics of the fundamental voltage and current, with measurement bandwidth extending to 16 kHz. Harmonic content can be displayed in both tabular and graphical formats on the front panel LCD or via the included GUI program. The system calculates total harmonic distortion for both voltage and current from the harmonic data, with frequency accuracy of 2 counts and phase accuracy of 2 degrees typical.
Yes, the CSW5550 has a powerful AC and DC transient generation system that allows complex sequences of voltage, frequency, and waveshapes to be programmed. Transient generation is controlled independently yet time synchronized on all three phases with accurate phase angle control and synchronized transient list execution. Combined with multiphase arbitrary waveform capabilities, the CSW can simulate virtually any AC line condition or DC disturbance for comprehensive testing including MIL-STD-704, DO-160, and power supply susceptibility testing.
The CSW5550 power analyzer offers high accuracy across multiple parameters. Voltage measurements are accurate to 0.5% plus 250 mV, current to 0.1% plus 150 mA in single-phase mode. Real power and apparent power measurements are accurate to 0.15% plus 9 W and 0.15% plus 9 VA respectively in single-phase mode. Frequency accuracy is 0.1% plus 1 digit for frequencies from 45 Hz to 819.1 Hz, with phase accuracy of 0.5 degrees from 45 to 100 Hz.