Keysight Technologies N5227B-400
4-port, 10 MHz - 67 GHz PNA Network Analyzer, 1.85 mm (m)
Rent or Lease
Keysight Technologies – N5227B-400
The Keysight Technologies N5227B-400, 4-port, 50 GHz, PNA network analyzer offers excellent performance for testing amplifiers, mixers and frequency converters. The Keysight Technologies N5227B-400’s exceptional hardware and powerful measurement applications are built to measure a broad range of devices quickly and accurately. The Keysight Technologies N5227B-400 can measure pulsed S-parameters easily using built-in pulse modulators and pulse generators.
N5227B-400 Product Highlights
- Maximum frequency: 67 GHz
- Dynamic range: 127 dB
- Output power: 13 dBm
- Overcome tough measurement challenges with the highest performing microwave network
- Measure the smallest uncertainty and highest stability S-parameters
- Applications that simplify setups and let you efficiently characterize active components
- Customize to the right level of performance for specific budget and measurement needs
- Multi-touch display
- Intuitive user interface
Keysight Technologies & TRS-RenTelco
TRS-RenTelco is a proud partner of Keysight Technologies and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Keysight Technologies allows us to ensure we have the right Network/Impedance Analyzers solution for your job.
Renting Network/Impedance Analyzers
With TRS-RenTelco renting Network/Impedance Analyzers equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Additional Information
Manufacturer Home Page | Keysight Technologies.
- Configurations
- Resources
- FAQsAI
--, 400
See Configuration Details
-
400
4-port with second source
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 400, SYNV7
See Configuration Details
-
400
4-port with second source
-
SYNV7
Synthesizer version 7
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies N52xxB Configuration Guide
Keysight Technologies PNA Configuration Guide
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What frequency coverage does the Keysight N5227B provide?
The N5227B operates from 10 MHz to 67 GHz with 1.85 mm male test port connectors. This extended frequency range enables measurements well into the millimeter-wave spectrum, making it suitable for 5G, automotive radar, satellite communications, and other high-frequency applications requiring precise characterization beyond 50 GHz.
What is Option 400 on the N5227B network analyzer?
Option 400 provides a 4-port base model with standard test set and includes an internal second source. It features 12 front-panel access loops for configurable measurements and a built-in solid-state RF transfer switch in the R1 reference-receiver path. The dual sources enable mixer testing, intermodulation distortion measurements, and frequency-offset applications without external signal generators.
What system dynamic range does the N5227B Option 400 achieve?
The N5227B with Option 400 delivers system dynamic range specifications of 112 dB at 64 to 67 GHz and up to 136 dB typical at 500 MHz to 1 GHz. At 10 Hz IF bandwidth, the noise floor is as low as -114 dBm, providing excellent sensitivity for characterizing low-loss passive components and high-isolation devices throughout the entire frequency range.
How does the N5227B perform measurements above 67 GHz?
While the N5227B is specified to 67 GHz, typical performance data is available from 67 to 70 GHz in the data sheet. However, performance may be degraded at particular frequencies in this extended range due to connector modes of the 1.85 mm connectors. For frequencies beyond 70 GHz, millimeter-wave frequency extenders can be used with the N5227B as the base analyzer.
What calibration standards are recommended for the N5227B?
The N5227B is designed to work with the 85058B mechanical calibration kit and N4694A electronic calibration module for 1.85 mm connectors. The data sheet provides corrected system performance specifications using these standards, with typical directivity of 35 dB and source match of 40 dB after full 2-port calibration in the 10 MHz to 67 GHz range.
Can the N5227B measure high-power devices?
The N5227B with Option 400 can safely accept signals up to +27 dBm at the test ports. For higher power testing, Option 419 adds source and receiver attenuators (50 dB in 10 dB steps) that extend the power handling and measurement range, enabling characterization of power amplifiers and other high-power components at millimeter-wave frequencies.
What is the measurement speed of the N5227B for production testing?
The N5227B achieves typical cycle times as fast as 4.5 microseconds per point for CW time sweeps. For a full 67 GHz frequency span with 201 points and 1 kHz IF bandwidth, the typical measurement completion time is approximately 13 milliseconds, making it effective for high-volume testing while maintaining excellent measurement accuracy and dynamic range.
Does the N5227B support time domain analysis?
Yes, the N5227B supports time domain analysis through the S93010B application software. This allows transformation of frequency domain data to time domain for applications such as fault location, impedance discontinuity identification, and gating of unwanted responses. The enhanced time domain option (S93011B) adds TDR functionality for comprehensive transmission line and interconnect analysis.
