Keysight Technologies N5242B-224
2-port, 10 MHz - 26.5 GHz PNA-X Network Analyzer, 3.5 mm (m)
Rent or Lease • Buy Used
Save space for test station equipment with the compact Keysight (formerly Agilent) N5242B-224 two-port network analyzer.
The Keysight N5242B-224 offers powerful solutions for microwave testing for frequencies above 10GHz. Reduce test time and get faster insights into component behavior with the N5242B network analyzer's measurement integrity and flexibility. With just the right combination of speed and performance accuracy, the N5242B is the ultimate solution for testing of linear and nonlinear device characterization with superior error correction.
Applications of the N5242B-224 network analyzer include S-parameter (CW and pulsed) measurements, noise-figure measurements, gain compression, conversion gain/loss, X-parameters and balance measurements, intermodulation and harmonic distortion, pulsed RF and antenna tests.
Keysight N5242B-224 Features and Specifications:
- Two-port, configurable test set, source and receiver attenuators, bias tees, second source, combiner, mechanical switches
- Maximum frequency: 26.5GHz
- Dynamic range: 127 dB
- Damage input level: Source 2 out 1, source 2 out 2: > 30 dBm (RF) >0 V (DC)
- Output power: 13 dBm
- Trace noise: 0.002 dBrms
- Harmonics: -60 dBc noise floor -114 dBm
- Best speed at 201 point, 1 sweep 6 ms
The Keysight (formerly Agilent) N5242B-224 two-port, 26.5GHz PNA-X network analyzer is available for rent or lease at TRS-RenTelco with 24/7 support. Call us at 800.874.7123 to learn more about our calibrated test equipment.
- Configurations
- Resources
- FAQsAI
--, 224
See Configuration Details
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cable Guard
Qty: 2 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 224, S93029B, S93029B-KRS, S93029B-R-A5A-001-A
See Configuration Details
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
S93029B-KRS
Keysight Software Support While On Rent
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Mouse Optical Wheel
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Handle Kit 6-Hole
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Keyboard USB
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
Cable Assembly Semi-Rigid
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Cable Guard
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 029, 224, S93029B, S93029B-KRS, S93029B-R-A5A-001-A
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
S93029B-KRS
Keysight Software Support While On Rent
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Cable Guard
Qty: 2 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 224, S93029A-1FP, S93080A-1FP, S93086A-1FP, S93087A-1FP
See Configuration Details
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029A-1FP
Noise Figure
-
S93080A-1FP
Frequency-offset measurements
-
S93086A-1FP
Gain compression application
-
S93087A-1FP
Intermodulation distortion measurements
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Cable Guard
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 022, 224, S93010A-1FP, S93080A-1FP, S93898A-1FP, SYNV7
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
022
Add pulse modulator to internal 2nd source
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93010A-1FP
Time domain measurements
-
S93080A-1FP
Frequency-offset measurements
-
S93898A-1FP
Built-in performance test software for standards compliant calibration, perpetual license
-
SYNV7
Synthesizer Version 7
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Cable Guard
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 224, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, SYNV7
See Configuration Details
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
SYNV7
Synthesizer version 7.0
-
S93029B-KRS
Keysight Software Support While On Rent
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Guard
Qty: 2 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 029, 224, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, SYNV7
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
SYNV7
Synthesizer version 7.0
-
S93029B-KRS
Keysight Software Support While On Rent
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Guard
Qty: 2 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 022, 224, S93010A-1FP, S93080A-1FP, S93898A-1FP
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 022, 224, S93010A-1FP, S93080A-1FP, S93242B, S93242B-R-A5Q-001-A, S93242B-R-A6Q-001-L, S93898A-1FP
See Configuration Details
-
S93242B
PNA-X Core Software to 26.5 GHz
-
S93242B-R-A5Q-001-A
Core Software node-locked perpetual license
-
S93242B-R-A6Q-001-L
Core software updates and enhancements, node-locked - 1 year
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 029, 224, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, SYNV7
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
SYNV7
Synthesizer version 7.0
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Guard
Qty: 2 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 029, 224, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, S93086B-KRS, S98086B-A5A-001-A
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
029
Fully-corrected noise-figure measurements to 26.5 GHz
-
224
2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
S93086B-KRS
Keysight Software Support While On Rent
-
S98086B-A5A-001-A
Gain compression measurements, node-locked perpetual license
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter 3.5 mm(f) - 3.5 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 9 -
Cable Guard
Qty: 2 -
Cable Assembly Semi-Rigid
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies N5242B Spec Sheet
Keysight Technologies PNA Configuration Guide
Keysight Technologies PNA Configuration Guide
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What is the frequency range of the Keysight N5242B with Option 224?
The Keysight N5242B PNA-X network analyzer covers a frequency range from 10 MHz to 26.5 GHz. This wide frequency span makes it suitable for characterizing RF and microwave components across multiple frequency bands. The instrument provides precise S-parameter measurements throughout its entire operating range.
What does Option 224 include in the N5242B configuration?
Option 224 provides a 2-port standard test set with six front-panel access loops, extended power range with source and receiver attenuators, an internal second source with combiner, and mechanical switches. This configuration enables advanced measurements including mixer characterization, gain compression testing, and amplifier measurements. Note that Option 224 does not include bias tees; for built-in bias tees, Option 225 is required.
What is the dynamic range of the N5242B Option 224?
The N5242B with Option 224 offers excellent dynamic range that varies by frequency. From 500 MHz to 8.5 GHz, the system dynamic range is 127 dB with maximum leveled output power of 13 dBm and noise floor of -114 dBm at 10 Hz IF bandwidth. The receiver dynamic range reaches up to 130 dB typical in this frequency range, providing exceptional sensitivity for measuring low-level signals.
Can the N5242B Option 224 measure amplifier noise figure?
The base N5242B Option 224 configuration does not include noise figure measurement capability. To perform high-accuracy noise figure measurements on amplifiers and other active devices, you must add Option 029, which provides dedicated noise receiver hardware and firmware. Option 029 requires one of the extended power range configurations like Option 224.
What is the maximum output power of the N5242B Option 224?
The maximum leveled output power varies by frequency range. For frequencies from 500 MHz to 20 GHz, the N5242B Option 224 delivers up to 13 dBm on port 1 and 10 to 13 dBm on port 2 depending on frequency. At higher frequencies from 20 to 24 GHz, output power is approximately 12 dBm, and from 24 to 26.5 GHz it reduces to approximately 5 dBm on port 1.
How many test ports does the N5242B Option 224 have?
The N5242B with Option 224 is configured as a 2-port network analyzer. The test ports use 3.5 mm male connectors suitable for frequencies up to 26.5 GHz. The instrument includes six front-panel access loops for connecting to internal signal paths, enabling advanced measurement setups and custom test configurations.
What is the IF bandwidth range on the N5242B?
The N5242B supports IF bandwidth settings from 1 Hz to 15 MHz, providing flexibility to optimize measurement speed versus noise performance. Narrower IF bandwidths like 10 Hz reduce noise floor and improve dynamic range for measuring high-loss devices, while wider bandwidths up to 15 MHz enable faster sweep times for production testing applications.
Does the N5242B Option 224 support time domain measurements?
Yes, the N5242B includes time domain transformation capabilities as a standard feature. You can transform frequency domain S-parameter data into time domain using various gating functions to identify and characterize discontinuities, reflections, and impedance variations in devices and transmission lines. This is particularly useful for fault location and analyzing distributed components.