Extension Of Calibration To 5 Yrs, 4 Scheduled
External Generator Control Retrofittable In Rohde&Schwarz Service (Hardware Option)
High Pass Filter Improved Dynamic Range For Measurement Of Harmonics, Suppression Of Fundamental Signals From 300 Mhz To 1.8 Ghz, Option R&S®Fswp-B1 Required (Software License)
Signal And Spectrum Analyzer 10hz To 50ghz For R&S®Fswp50 (Hardware Option, Retrofittable In Factory)
Solid State Drive, 64 Gb With Analyzer Firmware For Exchange Against Standard Ssd For Instruments With Ipc11 Cpu Board (Hardware Option)
Rf Preamplifier, 20 Db 100khz To 50ghz For R&S®Fswp50 Option R&S®Fswp-B1 Required (Hardware Option)
High Stability Ocxo With Low Phase Noise (Hardware Option)
Cross Correlation For Phase Noise Analyzer R&S®Fswp50 From 1mhz To 50ghz Low Phase Noise, Includes R&S®Fswp-B4, Excludes Option R&S®Fswp-B60 (Hardware Option)
Signal Source For Additive Phase Noise Measurement, Model Dependent From 10 Mhz To Max. 18 Ghz, Requires R&S®Fswp-B60 Or R&S®Fswp-B61 (Hardware Option)
Extension Repair Coverage 4 Years 1 To 5yrs
Cord Power
Qty: 1USB Drive with Phase Noise Getting Started Guide
Qty: 1Adapter 2.92 mm(f) - 2.4 mm(f)
Qty: 1Cross Correlation For Phase Noise Analyzer
Signal And Spectrum Analyzer 10Hz To 50GHz
RF Preamplifier, 20 dB 100kHz To 50GHz
High Stability OCXO With Low Phase Noise
Adapter 2.4mm(f) - 2.4mm(f)
Qty: 1Cord Power
Qty: 1Adapter 2.92 mm(f) - 2.4 mm(f)
Qty: 1Software and Manuals
Qty: 1Signal Source For Additive Phase Noise Measurement, Model Dependent From 10 Mhz To Max. 18 Ghz, Requires R&S®Fswp-B60 Or R&S®Fswp-B61 (Hardware Option)
Signal And Spectrum Analyzer 10hz To 50ghz For R&S®Fswp50 (Hardware Option, Retrofittable In Factory)
Cross Correlation For Phase Noise Analyzer R&S®Fswp50 From 1mhz To 50ghz Low Phase Noise, Includes R&S®Fswp-B4, Excludes Option R&S®Fswp-B60 (Hardware Option)
Accessory 19" Adapter Bw2010, Cabinet 5hu 1/1
Cord Power
Qty: 1Adapter 1.85 mm(f) - 1.85 mm(f)
Qty: 1Handle Kit 19 in ZZA-KN5 5HU 1-1
Qty: 1Software and Manuals
Qty: 1Extension To 320 Mhz Signal Analysis Bandwidth (Retrofit In Service) (Hardware Option)
Signal And Spectrum Analyzer 10hz To 50ghz For R&S®Fswp50 (Hardware Option, Retrofittable In Factory)
Rf Preamplifier, 20 Db 100khz To 50ghz For R&S®Fswp50 Option R&S®Fswp-B1 Required (Hardware Option)
Cross Correlation For Phase Noise Analyzer R&S®Fswp50 From 1mhz To 50ghz Low Phase Noise, Includes R&S®Fswp-B4, Excludes Option R&S®Fswp-B60 (Hardware Option)
Signal Source For Additive Phase Noise Measurement, Model Dependent From 10 Mhz To Max. 18 Ghz, Requires R&S®Fswp-B60 Or R&S®Fswp-B61 (Hardware Option)
Resolution Bandwidth >10 Mhz, 20 Mhz And 50 Mhz Additionally Option R&S®Fswp-B1 Required, For R&S®Fswp50 (Hardware Option)
Noise Figure Measurement Application Noise Source Required, R&S®Fswp-B1 Required Preamplifier R&S®Fswp-B24 Recommended (Software License)
Pulse Measurement Application R&S®Fswp-B1 Required (Software License)
Transient Measurement Application (Software License)
Accessory 19" Adapter Bw2010, Cabinet 5hu 1/1
Cord Power
Qty: 1Adapter 1.85 mm(f) - 1.85 mm(f)
Qty: 1Handle Kit 19 in ZZA-KN5 5HU 1-1
Qty: 1Software and Manuals
Qty: 1Signal And Spectrum Analyzer 10Hz To 50GHz
Support For Harmonic Mixers, Includes LO/IF Ports For External Mixers
RF Preamplifier, 20 dB 100kHz To 50GHz
Cross Correlation For Phase Noise Analyzer Includes R&SFSWP-B4
Signal Source For Additive Phase Noise Measurement, Model Dependent From 10 MHz To Max. 18 GHz
Resolution Bandwidth >10 MHz, 20 MHz And 50 MHz Additionally
Measurement application for detection and display of low level spurious signals
Cord Power
Qty: 1Cable RF SMA(m) -SMA(m) 1 m
Qty: 2Adapter 1.85 mm(f) - 1.85 mm(f)
Qty: 1Software and Manuals
Qty: 1Rohde & Schwarz FSWP Spec Sheet