2 HU with 5" touch display
Removable Mass Storage
Remote Control GPIB and USB
8 kHz to 6 GHz
High Performance OCXO Reference Oscillator
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
2 HU with 5" touch display
Cord Power
Qty: 1USB Drive Manuals
Qty: 1Remote Control GPIB and USB
8 kHz to 6 GHz
Ultra Low Phase Noise
2 HU with 5" touch display
Pulse modulator
Pulse generator
AM / FM / PhiM
Rack Kit 19" Adapter BW2010 Advanced, Cabinet 2HU 1/1
Cord Power
Qty: 1Rack Kit with Cabinet 2 HU 19 in Adapter
Qty: 1USB Drive Manuals
Qty: 1Removable Mass Storage
8 kHz to 6 GHz
High Performance OCXO Reference Oscillator
Remote Control GPIB and USB
3 HU with 7" touch display
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 1Ultra Low Phase Noise
8 kHz to 6 GHz
Differential Clock Synthesizer 3 GHz
2 HU with 5" touch display
Rack Kit 19" Adapter BW2010 Advanced, Cabinet 2HU 1/1
Cord Power
Qty: 1Rack Kit with Cabinet 2 HU 19 in Adapter
Qty: 1void- USB Drive Manuals
Qty: 18 kHz to 6 GHz
Differential Clock Synthesizer 3 GHz
Remote Control GPIB and USB
2 HU with 5" touch display
Ultra Low Phase Noise
100 MHz, 1 GHz Ultra low noise reference Input/output
Cord Power
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
Ultra Low Phase Noise
Removable Mass Storage
Remote Control GPIB and USB
2 HU with 5" touch display
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
High Performance OCXO Reference Oscillator
Removable Mass Storage
Remote Control GPIB and USB
2 HU with 5" touch display
AM / FM / PhiM (software license)
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
High Performance OCXO Reference Oscillator
Removable Mass Storage
Remote Control GPIB and USB
2 HU with 5" touch display
Pulse modulator
Pulse generator
8 kHz to 6 GHz
High Performance OCXO Reference Oscillator
Removable Mass Storage
Remote Control GPIB and USB
3 HU with 7" touch display
High output power 3/6 GHz, frequency option
Frequency range: 8 kHz to 6 GHz, not installable post factory (hardware option)
Ultra low phase noise
Removable mass memory, retrofittable in R&S service (hardware option)
Remote control GPIB/USB, retrofittable in R&S service (hardware option)
Height unit 2 HU with 7" touch display
AM / FM / PhiM (software license)
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
High Performance OCXO Reference Oscillator
Removable Mass Storage
Remote Control GPIB and USB
3 HU with 7" touch display
High output power 3/6 GHz, frequency option
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
Ultra Low Phase Noise
Removable Mass Storage
Remote Control GPIB and USB
2 HU with 5" touch display
High output power
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
Ultra high output power 3/6 GHz, frequency option
2 HU with 5" touch display
High output power
Cord Power
Qty: 1Memory Card 8 GB
Qty: 1USB Drive Manuals
Qty: 18 kHz to 6 GHz
Ultra Low Phase Noise
Removable Mass Storage
Remote Control GPIB and USB
2 HU with 5" touch display
Flexible reference Input from 1MHz- 100MHz
8 kHz to 6 GHz
Remote Control GPIB and USB
2 HU with 5" touch display
Pulse modulator
Pulse generator
High output power 3/6 GHz, frequency option
AM / FM / PhiM
Rohde & Schwarz SMA100B Spec Sheet
Content is AI-generated. Verify critical details with manufacturer-provided resources.
The Rohde & Schwarz SMA100B with option B106 is an RF signal generator covering 8 kHz to 6 GHz. It delivers exceptionally pure signals with very low phase noise, harmonic content, and nonharmonic spurious signals. The B106 option includes an electronic step attenuator and supports ultra high output power up to 38 dBm with optional power upgrade options.
The SMA100B B106 covers 8 kHz to 6 GHz with a frequency setting resolution of 0.001 Hz. The frequency setting time is less than 2.0 ms after an IEC/IEEE bus delimiter. It also supports ramp sweep mode with a maximum sweep rate of 250 MHz/ms from 3 GHz to 6 GHz, and 500 MHz/ms below 375 MHz.
The SMA100B B106 delivers SSB phase noise of less than -135 dBc (typically -140 dBc) at 1 GHz and less than -119 dBc (typically -124 dBc) at 6 GHz, both at 20 kHz offset. With the R&S SMAB-B709 option, the phase noise at 6 GHz improves further to -124 dBc at 10 kHz offset. Close-in phase noise at 10 GHz equivalent performance is less than -83 dBc (typical) at 10 Hz offset.
In standard configuration, the SMA100B B106 delivers up to +19 dBm from 1 MHz to 6 GHz. With the R&S SMAB-K31 high power option, output increases to +25 dBm. The R&S SMAB-B32 ultra high output power option pushes the maximum level to +30 dBm from 8 MHz to 6 GHz, achieving up to 38 dBm of ultra high output power as highlighted in the key features.
The SMA100B B106 achieves harmonic suppression better than -60 dBc above 10 MHz. Nonharmonic spurious signals are less than -96 dBc below 750 MHz and less than -80 dBc from 3 GHz to 6 GHz. The wideband noise floor is less than -155 dBc from 8 MHz to 1.5 GHz and less than -150 dBc from 3 GHz to 6 GHz at a 10 MHz carrier offset.
The SMA100B B106 supports AM, FM, phase modulation, and pulse modulation through optional software and hardware upgrades. FM offers high bandwidth and low noise modes. Phase modulation supports high deviation (N x 20 rad), high bandwidth (N x 1 rad), and low noise (N x 0.25 rad) modes. Pulse modulation features an on/off ratio greater than 80 dB with rise/fall times less than 10 ns.
The SMA100B B106 extends the frequency coverage from 3 GHz to 6 GHz compared to the B103, making it suitable for testing Wi-Fi 5 GHz band devices, sub-6 GHz 5G components, and C-band satellite systems. Both share the same electronic attenuator technology and level accuracy (less than 0.5 dB from 8 MHz to 3 GHz), but the B106 covers additional bands at 3 GHz to 6 GHz with level accuracy less than 0.9 dB.
The SMA100B B106 delivers level accuracy of less than 0.5 dB from 8 MHz to 3 GHz and less than 0.9 dB from 3 GHz to 6 GHz at levels from -90 dBm to +25 dBm. The level setting time is less than 1.5 ms without relay switchover. It supports multiple level setting characteristics including auto, uninterrupted level setting, strictly monotone, and constant VSWR modes to optimize behavior for specific applications.