What interface types does the T-BERD/MTS-5800-100G support?

The 5800-100G is a dual-port 100G handheld tester supporting a comprehensive range of interfaces including Ethernet (10 Mbps to 100 Gbps), SONET/SDH, OTN, Fibre Channel, and CPRI/OBSAI. It accommodates SFP/SFP+/SFP28 and QSFP+/QSFP28/CFP4 pluggable modules, providing the flexibility needed to test legacy and emerging technologies throughout metro/core, data center interconnect, and business services applications.

How fast can the T-BERD/MTS-5800-100G perform RFC 2544 testing?

The 5800-100G delivers industry-leading speed for RFC 2544 and Y.1564 SAMComplete Ethernet service activation testing with enhanced time efficiency. It concurrently measures throughput, frame delay, and frame delay variation in addition to frame loss and committed burst size (CBS). The automated turn-up test validates key performance indicators quickly, including nanosecond-accurate latency measurements at rates up to 100 GE.

What is the latency measurement accuracy of the 5800-100G?

The T-BERD/MTS-5800-100G provides high-accuracy latency measurements integrated into RFC 2544 and Y.1564 SAMComplete testing. The CSAM (Complete Service Activation Module) delivers 10 ns resolution with an accuracy of ±65 ns or better at 100 GE rates. This nanosecond-accurate latency measurement capability is essential for validating stringent SLA requirements in modern carrier and data center networks.

Does the 5800-100G support OTN testing?

Yes, the 5800-100G provides comprehensive OTN testing up to 112G OTU4 rates. The unique OTN Check workflow tool automates OTN service activation by integrating OTN payload verification, round-trip delay, and network management transparency testing. It supports complete ODU multiplexing mappings with nested ODU functionality including ODU0, ODU1, ODU2/2e, ODU3, and ODUFLEX, as well as FEC testing and all 6 TCMs concurrently.

What is the Optics Self-Test feature and why is it useful?

Optics Self-Test is a workflow tool that verifies and troubleshoots performance issues related to high-speed optics, especially QSFP+/QSFP28 and CFP4 modules. This field-optimized test integrates bit error theory algorithms, clock offset verification, and per-lambda power monitoring to ensure pluggable optics run error-free. When coupled with RS-FEC, it provides both pre-FEC and post-FEC testing, helping isolate pluggable optics issues quickly in field environments.

Can the 5800-100G perform dual-port testing simultaneously?

Yes, the 5800-100G features dual-port operation that runs two tests simultaneously, including two 100G or high-speed tests. This capability doubles testing efficiency, allowing technicians to verify bidirectional services or test multiple circuits concurrently. The compact handheld form factor (7 x 9.5 x 3.2 inches) makes it the industry's smallest dual-port 100G test instrument.

What fiber test tools are compatible with the T-BERD/MTS-5800-100G?

The 5800-100G is compatible with multiple Viavi fiber test tools including the P5000i fiber microscope for connector end-face inspection and analysis, MP-Series optical power meters for optical power and loss measurements, OTDR modules for fiber link characterization and fault finding with Smart Link Mapper software, and COSA, a CWDM Optical Spectrum Analyzer. This compatibility enables complete fiber and network layer testing with one handheld platform.

Does the 5800-100G support capture and decode functionality?

Yes, the 5800-100G provides capture and decode capabilities at all Ethernet rates. The captured traffic can be decoded using integrated Wireshark for detailed protocol analysis. Additionally, the Viavi built-in J-Mentor troubleshooting tool provides post-analysis problem identification, helping technicians quickly diagnose complex network issues and eliminate finger-pointing between service providers and customers.

VIAVI TB5800V2-100GE-DP Ethernet Test Set - Rental & Lease

Name: Viavi Solutions Inc. TB5800V2-100GE-DP
Brand: Viavi Solutions Inc.
SKU: VIA/TB5800V2-100GE-DP (Grouped)

Viavi Solutions Inc. TB5800V2-100GE-DP

40GE/100GE TEST SET

Rent or Lease • Buy Used From $20,000

Achieve highly efficient fiber testing, service activation, troubleshooting, and maintenance with the Viavi (formerly JDSU) T-BERD/MTS-5800-100G all-in-one handheld network test equipment.

The Viavi T-BERD is the industry's smallest handheld 10G instrument. This Ethernet, SONET, SDH, OTN, CPRI/OBSAI, and fiber-optic tester is best suited for in-field network applications. This superior test set is rugged and compact and features ultra-modern interfaces, such as SFP/SFP /SFP28 and QSFP /QSFP28/CFP4. The 5800-100G is a great choice for high-quality Ethernet/IP network testing, mobile and back-haul characterization, validation, and troubleshooting.

JDSU T-BERD 5800 Advanced Testing Features

The JDSU 5800 handheld network tester offers advanced testing features that support faster, more accurate network testing. They include:

Optics self-test
Ethernet line rate capture/decode
TrueSpeed per RFC 6349
J-profiler
Wire speed capture/decode
Automated J-mentor and OTN check

This JDSU test equipment also features a large seven-inch multi-touch display and a tablet-like intuitive user interface for convenient navigation through test information and advanced workflows. The streamlined user interface displays simple pass/fail, green/red results. The dual-port operation of the JDSU 5800 test equipment can efficiently perform two tests simultaneously, including 100G/high-speed tests.

The T-BERD-5800 is compatible with the P5000i fiber microscope for convenient connector end-face inspection and analysis, and the MP-Series optical power meters for easy optical power and loss measurements. It can also be used with OTDR modules for accurate fiber-link characterization and fault finding. It also features extended battery life for longer in-field test times and offload results, and boots up quickly from power-on to test start.

Viavi T-BERD 5800 Benefits

Simplifies multi-technology testing with an all-in-one dual 100G handheld unit
Optimized for field use with a multi-touch screen, scripted workflows, and clear pass/fail results
Supports efficient best practices with repeatable methods and procedures
Speeds up fiber optics testing, Ethernet service activation, and troubleshooting tests

Viavi T-BERD 5800 Features and Specifications:

Supports comprehensive rate testing ranging from DSx/PDH (1.5M/2M) through to 112G OTU4
Industry's fastest RFC 2544 and Y.1564 SAMComplete Ethernet service verification test, including nanosecond-accurate latency measurements
Supports RFC 6349 TrueSpeed
Supports all fiber channel rates across dual ports, including 32GFC at 28.05Gbps
Support and testing of eCPRI and 1588 up to 25GE
Available suite of CPRI at all rates up to CPRI 10 running at 24.3Gbps, OBSAI, and eCPRI
Ensures that QSFP/QSFP28 and CFP4 modules run error-free with the field optimized optics self-test
Supports the Viavi 4100-Series OTDR and COSA modules with Smart Link Mapper optical analysis software, fiber microscopes, and optical power meters
Expandable with support for additional modules, such as the TEM (timing expansion module) for network test synchronization and timing
Complete ODU multiplexing mappings with nested ODU functionality, including ODU0, ODU1, ODU2/2e, ODU3, and ODUFLEX
FEC tests for correctable and uncorrectable errors

The Viavi (formerly JDSU) T-BERD/MTS 5800 handheld network tester is available for rent, lease, or sale at TRS-RenTelco.

We offer fully calibrated test equipment with 24/7 customer support throughout the year. To know more, request a quote or contact us at 800.874.7123.

HT Instruments COMBI521KIT

Keysight Technologies SL1040A

Fluke 1738

Rohde & Schwarz FSWP26

Keysight Technologies N5245B-423

HT Instruments COMBI521KIT

Keysight Technologies SL1040A

Fluke 1738

Rohde & Schwarz FSWP26

Keysight Technologies N5245B-423

Advancing Beyond.

Pioneering essential solutions and technologies for over 35 years

Fluke Networks Expertise to help you get your job done.

Providing tomorrow’s test technologies today.

Quality products from the leading test & measurement supplier.

Over 70 years of experience designing Test and Measurement equipment.

Test Solutions that accelerate Design.

For every role, in every business, everywhere in the world...

TRS-RenTelco carries 5G solutions for every industry.

TRS-RenTelco carries the latest Aerospace & Defense test solutions.

Discover TRS-RenTelco’s comprehensive test equipment solutions for AI development

Discover TRS-RenTelco’s comprehensive solutions for Automotive testing.

Discover TRS-RenTelco’s comprehensive test equipment solutions for Data Centers

TRS-RenTelco carries the latest handheld, bench, and portable equipment.

TRS-RenTelco carries a broad assortment of IoT test equipment.

Discover TRS-RenTelco’s comprehensive test solutions for RF & Microwave.

TRS-RenTelco carries comprehensive test solutions to Design & Debug.

TRS-RenTelco has your Wireless Install & Maintenance test solutions.

TRS-RenTelco has your Wireline/Fiber Install & Maintenance solutions.

Viavi Solutions Inc. TB5800V2-100GE-DP

40GE/100GE TEST SET

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

Buy Used

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

* Leased or Buy Used product accessories will be confirmed with quote.

Rent or Lease

Buy Used

What interface types does the T-BERD/MTS-5800-100G support?

How fast can the T-BERD/MTS-5800-100G perform RFC 2544 testing?

What is the latency measurement accuracy of the 5800-100G?

Does the 5800-100G support OTN testing?

What is the Optics Self-Test feature and why is it useful?

Can the 5800-100G perform dual-port testing simultaneously?

What fiber test tools are compatible with the T-BERD/MTS-5800-100G?

Does the 5800-100G support capture and decode functionality?

Customers Also Ordered

Ethernet Test Sets

Viavi Solutions Inc. CQSFP-112G-3-4-LR4