Hover to zoom
Specs and manuals
Need configuration help?
Talk with a Application Engineer
The Keysight (formerly Agilent) 81130A with one or two Keysight (formerly Agilent) 81131A output modules is a 400 MHz precision single/dual-channel Pulse Data Generator. With one or two or Keysight (formerly Agilent) 81132A output modules, the Keysight (formerly Agilent) 81130A even becomes a precision 600 MHz/1.32 Gbps single/dual-channel Pulse Date Generator. The 81130A offers advanced delay and width accuracy over the 81110A due to its PLL oscillator. However, please note that this precision oscillator is not triggerable. In comparison to the 81110A, the 81130A offers a larger, segmentable memory (64 kbit). Its counted loop and sequenced PRBS features provide full flexibility for serial data requirements such as data communication messages and initialization routines. Dual channels can be EXORed, i.e. added internally. The combined four, independent timing edges allow pulses with almost arbitrary shapes in a single signal. Depending on the output module type, the pulse transitions are selectable (800 ps or 1.6 ns, 81131A) or fixed at 500 ps (81132A). The source impedance is 50 Ohm, the output voltage into 50 Ohm is up to 3.8 Vpp (81131A) and 2.5 Vpp (81132A) respectively.
Note: Each Keysight (formerly Agilent) 81130A 400 MHz single-/dual-channel Pulse Pattern Generator requires one/two of the output channels Keysight (formerly Agilent) 81131A (400 MHz, 3.8 V, 50 Ohm into 50 Ohm). Each Keysight (formerly Agilent) 81130A 660 MHz single-/dual-channel Pulse Pattern Generator requires one/two of the output channels Keysight (formerly Agilent) 81112A (660 MHz, 2.5 V, 50 Ohm into 50 Ohm) 81130, 81131A and 81132A output channels cannot be combined in one and the same 81130A.
If you are looking for a new or well-maintained used Keysight 81130A pulse data generator for rent or lease, contact us at TRS-RenTelco. Our experienced team of metrologists and technicians calibrate each product to stringent standards in our 50 GHz ANSI/NCSL Z540-1 compliant labor