Keysight Technologies N5225B-200
2-port, 10 MHz - 50 GHz PNA Network Analyzer, 2.4 mm (m)
Rent or Lease
Keysight Technologies – N5225B-200
The Keysight Technologies N5225B-200, 2-port, 50 GHz, PNA network analyzer offers excellent performance for testing amplifiers, mixers and frequency converters. The Keysight Technologies N5225B-200’s exceptional hardware and powerful measurement applications are built to measure a broad range of devices quickly and accurately. The Keysight Technologies N5225B-200 can measure pulsed S-parameters easily using built-in pulse modulators and pulse generators.
N5225B-200 Product Highlights
- Maximum frequency: 50 GHz
- Dynamic range: 127 dB
- Output power: 13 dBm
- Overcome tough measurement challenges with the highest performing microwave network
- Measure the smallest uncertainty and highest stability S-parameters
- Applications that simplify setups and let you efficiently characterize active components
- Customize to the right level of performance for specific budget and measurement needs
- Multi-touch display
- Intuitive user interface
Keysight Technologies & TRS-RenTelco
TRS-RenTelco is a proud partner of Keysight Technologies and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Keysight Technologies allows us to ensure we have the right Network/Impedance Analyzers solution for your job.
Renting Network/Impedance Analyzers
With TRS-RenTelco renting Network/Impedance Analyzers equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Additional Information
Manufacturer Home Page | Keysight Technologies.
- Configurations
- Resources
- FAQsAI
--, 200
See Configuration Details
-
200
2 ports, single source, base hardware configuration
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 200, S93010A-1FP
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 200, S93080A-1FP, S93225B, S93225B-R-A5N-001-A, S93225B-R-A6N-001-L
See Configuration Details
-
S93225B
PNA Core Software to 50 GHz
-
S93225B-R-A5N-001-A
Core Software node-locked perpetual license
-
S93225B-R-A6N-001-L
Core software updates and enhancements, node-locked - 1 year
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 200, SYNV7
See Configuration Details
-
200
2-port, base hardware configuration
-
SYNV7
Synthesizer and reference assembly, version 7 DDS, single-source
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies N522xB Spec Sheet
Keysight Technologies PNA Configuration Guide
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What is the frequency range of the Keysight N5225B PNA network analyzer?
The N5225B operates from 10 MHz to 50 GHz with a 2.4 mm male test port connector. This frequency range allows comprehensive characterization of microwave components across a broad spectrum, suitable for applications from RF through millimeter-wave frequencies.
What dynamic range can I expect from the N5225B with Option 200?
The N5225B with Option 200 delivers a system dynamic range of 114 dB at 47 to 50 GHz (specification) and up to 127 dB at 500 MHz to 1 GHz (typical). Dynamic range is measured at the test port with 10 Hz IF bandwidth, providing excellent sensitivity for low-level signal measurements.
How does the N5225B Option 200 differ from Option 201?
Option 200 provides the 2-port base model with standard test set, while Option 201 adds six front-panel access loops (jumpers) and an R1 receiver switch. The front-panel jumpers allow insertion of external components like filters or amplifiers, making Option 201 ideal for custom measurement configurations and advanced testing scenarios.
What is the trace noise performance of the N5225B?
The N5225B exhibits excellent trace noise performance with magnitude noise as low as 0.002 dB rms at 1 GHz to 10 GHz with 1 kHz IF bandwidth and 0 dBm signal level. Phase noise is typically 0.02 degrees rms under the same conditions, ensuring accurate and repeatable measurements of low-loss and high-Q devices.
What calibration kits are compatible with the N5225B for full 2-port calibration?
The N5225B is compatible with the 85056A and 85056D mechanical calibration kits, as well as the N4693A and N4693D electronic calibration modules for 2.4 mm connectors. The data sheet provides corrected system performance specifications for each of these calibration standards, with typical directivity of 40 dB and source match of 42 dB after calibration.
What is the maximum output power of the N5225B across its frequency range?
Maximum leveled output power varies by frequency, with typical values of +10 dBm from 10 MHz to 26.5 GHz and +5 dBm from 43.5 GHz to 50 GHz. The nominal preset power is set at 0 dBm, and the analyzer provides power resolution of 0.01 dB with a settable range from +13 dBm maximum to -95 dBm minimum.
Can the N5225B measure devices with high insertion loss?
Yes, the N5225B with Option 201 offers extended dynamic range at the direct receiver access input, providing up to 153 dB typical at 100 MHz to 250 MHz. This extended range, combined with low noise floor specifications (as low as -128 dBm at 10 Hz IF bandwidth), enables accurate measurement of high-loss devices such as filters, attenuators, and long cables.
What measurement speed can I achieve with the N5225B?
The N5225B provides typical cycle times as fast as 4.5 microseconds per point for CW time sweep measurements. For a full-span frequency sweep with 201 points and 1 kHz IF bandwidth, the typical cycle time is approximately 10.9 milliseconds, making it suitable for high-throughput production testing and rapid device characterization.
