Fluke Networks CFP-MM-ADD
Multimode modules add on kit for Versiv
Rent or Lease
Fluke Networks - CFP-MM-ADD
The Fluke Networks CFP-MM-ADD CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro Optical Loss Test Set (OLTS) provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module.
CFP-MM-ADD Product Highlights
- Versiv enables users to accomplish more than ever with a cable tester, accelerating every step of the testing process
- ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time
- Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels
- LinkWare PC management software provides unmatched analysis of test results and professional test reports
- LinkWare Live allows you to manage results and the testing process from your smart devices
- Performance:
- Three-second Autotest optical loss measurement of two fibers at two wavelengths with distance measurement and optical loss budget calculation
- Provides automatic Pass/Fail analysis to industry standards or custom test limits
- Identifies incorrect test procedures resulting in negative loss readings
- Interchangeable power meter adapters available for all typical connector types (SC, ST, LC and FC) to enable the most accurate 1-jumper reference method
- Built-in visual fault locator for basic troubleshooting and polarity determination
- Dual wavelength measurement capability on a single fiber allows the tester to be used in applications that require only one fiber link
- Compliant with TIA-526-14-B and IEC 61280-4-1 Encircled Flux requirements with no additional equipment or procedures
- Integrated Wi-Fi allows you to easily upload results to LinkWare Live
- Standards:
- Allows combined OLTS Tier 1 (basic), OTDR Tier 2 (extended) certification, end-face inspection and reporting when paired with OptiFiber™ Pro OTDR
- Set reference wizard verifies test reference cords (TRCs) per ISO/IEC 14763-3 and eliminates negative loss errors
- Encircled Flux compliant optical launch conditions as required by ANSI/TIA and ISO/IEC standards for testing multimode fiber
- Certify fiber optic endfaces to industry standards – IEC 61300-3-35
Fluke Networks & TRS-RenTelco
TRS-RenTelco is a proud partner of Fluke Networks and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Fluke Networks allows us to ensure we have the right Optical Test solution for your job.
Renting Optical Test
With TRS-RenTelco renting Optical Test equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Additional Information
Manufacturer Home Page | Fluke Networks.
- Configurations
- Resources
- FAQsAI
Base Model
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Barrel Simplex LC
Qty: 2 -
Adapter LC
Qty: 2 -
Jumper Simplex LC - LC Multimode 10GBs 2 m Aqua
Qty: 2 -
Adapter SC Interchangeable
Qty: 2 -
Test Reference Cord Encircled Flux SC - LC
Qty: 2 -
Power Meter Module Loss Length 850 nm / 1300 nm Multimode
Qty: 2 -
Case Patch Cable
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Base Model
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
LC/LC MM Test Reference Cord (TRC), 2M (MRC-50-LCLC)
Qty: 2 -
Power Meter Module Loss Length 850 nm / 1300 nm Multimode
Qty: 2 -
Barrel Simplex LC
Qty: 2 -
Test Reference Cord Encircled Flux SC - LC
Qty: 2 -
Adapter LC
Qty: 2 -
Adapter SC Interchangeable
Qty: 2 -
Case Patch Cable
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
certif
CertiFiber Pro Optical Loss Test Set Data Sheet
Fluke Versiv Series User Manual
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What is the CertiFiber Pro Multimode Add-on Kit used for?
The CertiFiber Pro Multimode Add-on Kit (CFP-MM-ADD) allows you to expand your existing Versiv system with multimode fiber testing capabilities. This add-on provides Tier 1 optical loss testing for 50/125 µm and 62.5/125 µm multimode fiber at 850 nm and 1300 nm wavelengths, enabling fast and accurate certification of multimode fiber optic cabling installations.
How fast can the CertiFiber Pro Multimode module test fiber links?
The CertiFiber Pro Multimode module completes a full autotest in less than 3 seconds in Smart Remote mode, testing 2 fibers at 2 wavelengths in one direction with automatic wavelength detection. In Far End Source mode and Loopback mode, testing takes 2 seconds or less, making it one of the fastest multimode fiber certification solutions available.
What wavelengths does the CertiFiber Pro Multimode module support?
The CertiFiber Pro Multimode module uses LED sources at 850 nm (±30 nm) and 1300 nm (±20 nm) for multimode fiber testing. These are the standard wavelengths specified for multimode fiber certification according to industry standards, ensuring compliance with TIA and ISO/IEC requirements.
Is the CertiFiber Pro Encircled Flux compliant?
Yes, the CertiFiber Pro is fully Encircled Flux compliant to TIA-526-14-B and IEC 61280-4-1 standards, without requiring additional equipment or special procedures. This ensures accurate and repeatable multimode fiber loss measurements that meet current industry requirements.
What is the maximum fiber length the CertiFiber Pro Multimode module can measure?
The CertiFiber Pro Multimode module can measure fiber lengths up to 12 km with an accuracy of ±1.5 m plus ±1% of the measured length. The power measurement range spans 0 dBm to -65 dBm at 850 nm and 0 dBm to -70 dBm at 1300 nm, providing sufficient dynamic range for most multimode installation scenarios.
What connector types work with the CertiFiber Pro Multimode module?
The CertiFiber Pro Multimode module comes standard with LC interchangeable connector adapters, but also supports SC, ST, and FC connector types as optional adapters. This flexibility allows you to test all common multimode connector types using the most accurate 1-jumper reference method recommended by industry standards.
Does the CertiFiber Pro Multimode module include a Visual Fault Locator?
Yes, the CertiFiber Pro includes a built-in Visual Fault Locator (VFL) operating at 650 nm nominal wavelength. The VFL provides output power between -5 dBm and 0 dBm with both continuous wave and pulsed modes (2 Hz to 3 Hz blink frequency), making it useful for basic fiber troubleshooting and polarity determination.
What is the calibration period for the CertiFiber Pro Multimode module?
The CertiFiber Pro Multimode module has a recommended re-calibration period of 1 year to maintain its specified measurement accuracy. The module features excellent measurement linearity across the measurement range at both 850 nm and 1300 nm wavelengths, ensuring reliable and repeatable multimode fiber certification results.
