Anritsu S362E
Site Master, 2 MHz to 6 GHz Cable, Antenna and Spectrum Analyzer, Type N(f)
Rent or Lease • Buy Used From $10,418
Anritsu - S362E
Install and maintain wireless networks for wireless service providers, contractors, military, aerospace and defense, and public safety applications with the Anritsu S362E Cable and Antenna Spectrum Analyzer.
The field-proven design of the Anritsu SiteMaster boasts a four-hour battery life with rugged, compact, and lightweight body along with daylight viewable display. With its high performance and extended capabilities, the S362E can be used as a spectrum and interference analyzer, as well as a cable and antenna analyzer. Make accurate measurements of parameters, such as occupied bandwidth, channel power, ACPR, C/I, RL, VSWR, cable loss, DTF, and phase.
S362E Product Highlights
• Spectrum analyzer: 9kHz to 6GHz
• Cable and antenna analyzer: 2MHz to 6GHz
• Return loss, cable loss, VSWR, distance-to-fault
• Phase, two-port transmission measurements
• Return loss, cable loss, VSWR, distance-to-fault
• Antenna Tuning
• Spectrum monitoring
• Transmitter Verification
Anritsu & TRS-RenTelco
TRS-RenTelco is a proud partner of Anritsu and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Anritsu allows us to ensure we have the right Wireless Test solution for your job.
Renting Wireless Test
With TRS-RenTelco, renting Wireless Test equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Links to Additional Information
Anritsu Products from TRS-RenTelco
- Configurations
- Resources
- FAQsAI
--, 15RNFN50-1.5-R or Equiv, OSLN50A-8
See Configuration Details
-
OSLN50A-8
Precision N(m) Open/Short/Load, 42dB, 8.0 GHz, 50 Ohm.
-
15RNFN50-1.5-R or Equiv
Test Port Extension Cable, Armored, with Reinforced Grip, 1.5 Meters, N(m) to N(f), 6 GHz, 50 Ohm
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
AC Adapter
Qty: 1 -
Battery Lithium Ion High Capacity 81W
Qty: 1 -
Adapter Automotive 12 VDC
Qty: 1 -
Cable USB-A - USB-MiniB
Qty: 1 -
Bag Logo Accessory Large
Qty: 1 -
Caution Card
Qty: 1 -
SOFTWARE AND MANUALS ON USB
Qty: 1 -
Carrycase Soft
Qty: 1 -
Cal Kit Open Short Load 8 GHz
Qty: 1 -
Cable Test Port Extension with Tuff-Grip 6 GHz
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
OSLN50-1, SLS06NM
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Carrycase Soft
Qty: 1 -
Battery Lithium Ion High Capacity 81W
Qty: 1 -
Cal Kit Open Short Load 8 GHz
Qty: 1 -
SOFTWARE AND MANUALS ON USB
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Anritsu S3x2E Spec Sheet
Anritsu Site Master S3xxE User Manual
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What makes the Anritsu S362E different from the S361E model?
The S362E includes all the cable and antenna analyzer capabilities of the S361E (2 MHz to 6 GHz), plus a full-featured spectrum analyzer covering 9 kHz to 6 GHz. This dual functionality allows technicians to perform both passive cable testing and active signal analysis with a single instrument. The spectrum analyzer features excellent DANL of -152 dBm in 10 Hz RBW and dynamic range greater than 95 dB.
What spectrum analyzer measurements can the S362E perform?
The S362E spectrum analyzer mode supports occupied bandwidth, channel power, ACPR, C/I ratio, field strength measurements using antenna calibration tables, and emission mask testing. It includes interference analysis capabilities with spectrogram display that can collect data for up to 72 hours, plus signal identification for up to 12 signals including FM, GSM, W-CDMA, CDMA, and Wi-Fi technologies.
What is the phase noise performance of the S362E?
The S362E delivers outstanding phase noise performance with maximum specification of -100 dBc/Hz at 10 kHz offset from a 1 GHz carrier, typically achieving -110 dBc/Hz. At 100 kHz offset, phase noise is specified at -105 dBc/Hz maximum with -112 dBc/Hz typical performance. At 1 MHz offset, it achieves -115 dBc/Hz maximum and -121 dBc/Hz typical, ensuring clean spectral measurements.
Can the S362E perform coverage mapping for wireless networks?
Yes, with optional GPS receiver and coverage mapping capability, the S362E can perform both indoor and outdoor RF coverage mapping. It measures RSSI and ACPR across coverage areas, automatically tags measurement locations with GPS coordinates, and saves maps in KML and JPEG formats. The mapping function supports time-based or distance-based measurement intervals for comprehensive site surveys.
What resolution bandwidth options does the S362E spectrum analyzer offer?
The S362E provides RBW selections from 10 Hz to 3 MHz in a 1-3 sequence with ±10% accuracy. Video bandwidth is independently adjustable from 1 Hz to 3 MHz. For EMC testing with quasi-peak detection, dedicated RBW settings of 200 Hz, 9 kHz, and 120 kHz are available. The auto RBW function optimizes bandwidth based on span for efficient measurements.
How does the interference analyzer option enhance the S362E capabilities?
The optional interference analyzer adds powerful troubleshooting tools including spectrogram with up to 72 hours of data collection, RSSI measurements with visual and audio signal strength indication, and automatic signal identification. The signal ID feature analyzes up to 12 simultaneous signals, identifying center frequency, bandwidth, signal type, channel number, carrier count, and SNR greater than 10 dB. Interference mapping triangulates interferer locations on display maps.
What is the displayed average noise level of the S362E with preamp on?
With the preamplifier enabled and reference level set to -50 dBm, the S362E achieves exceptional sensitivity. From 10 MHz to 2.4 GHz, DANL is -162 dBm typical in 1 Hz RBW. From 2.4 to 4 GHz, it is -159 dBm typical, and from 4 to 5 GHz it is -155 dBm typical. Even at the high end from 5 to 6 GHz, it maintains -150 dBm typical DANL in 1 Hz RBW.
Does the S362E support EMF safety measurements?
Yes, the S362E with optional electromagnetic field test capability can measure field strength for EMF safety compliance testing. It supports multiple Anritsu antennas covering 9 kHz to 6 GHz and displays results in various units including dBm/m², dBV/m, V/m, W/m², and A/m. The system provides maximum, minimum, and average measurements with pass/fail indicators against user-defined limit lines.
