Keysight Technologies N3306A
600W Electronic Load Module
Rent or Lease
Boost your manufacturing test throughput and reduce cost of ownership with the Keysight N3306A, a flexible and reliable electronic load module. With faster command processing time and automatically downloaded lists of command sequences, you can substantially reduce system development time.
The N3306A can be used in either the N3300A or the N3301A electronic load mainframe for system applications. With high speed, accurate programming and read-back, the N3306A is ideal for high-volume DC power supply test systems.
Its modular design allows reconfiguration of the system to suit your testing requirements, letting you test a variety of products and meet both present and future needs. Measure multiple load modules simultaneously with higher accuracy.
Keysight N3306A - Features and Specifications:
- Voltage – 0-60 V (warranted performance in the 25 degree C plus/minus 5 degree C region of the operating temperature range)
- Maximum power @ 40 degrees C1 - 600W
- Typical minimum operating voltage @ full scale current - 1.4V
- Accuracy - 1.3W
- DC connection terminal for ATE applications
- Ability to operate with full stability down to zero volts
The Keysight (formerly Agilent) N3306A is available for lease or rent at TRS-RenTelco with 365-day support. Contact us for more information or to request a quote today.
- Configurations
- Resources
- FAQsAI
--, UJG
See Configuration Details
-
UJG
Manually tightened connector
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Connector Terminal Block 14-Pin
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies N3306A Manual
Keysight Technologies N3306A Spec Sheet
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What are the voltage and current ratings of the N3306A electronic load module?
The N3306A is a DC electronic load module designed for testing power sources at voltages up to 60 V and currents up to 120 A. It can dissipate up to 600 watts of power, making it well suited for testing high-current power supplies, battery packs, and DC-DC converters in both development and manufacturing environments.
What operating modes does the N3306A support?
The N3306A supports three primary operating modes: Constant Current (CC) mode for drawing a fixed current regardless of voltage changes, Constant Voltage (CV) mode for maintaining a specific voltage across the input, and Constant Resistance (CR) mode for simulating resistive loads. Each mode can be used in fixed, transient, or list operation for versatile test scenarios.
Can the N3306A perform transient load testing?
Yes, the N3306A includes transient operation capability that allows you to program rapid transitions between two load levels. This feature is essential for testing power supply dynamics, voltage regulation under load changes, and battery response to current pulses. Transient operation works in conjunction with any of the three standard operating modes.
How do I measure voltage and current with the N3306A?
The N3306A provides comprehensive built-in measurement capabilities including DC voltage and current, RMS voltage and current, minimum and maximum voltage and current, and real-time power in watts. Remote sense connections on the rear panel control connector allow accurate voltage measurement directly at the device under test, eliminating errors caused by voltage drops in test leads.
Does the N3306A support remote programming and automated test integration?
Yes, the N3306A can be controlled remotely via GPIB or RS-232 interfaces using SCPI standard commands. The GPIB interface operates to IEEE 488.2, enabling full automated test system integration. The front panel also provides local control with a 15-character display showing channel, voltage, and current measurements for manual operation.
What protection features are built into the N3306A?
The N3306A includes multiple protection features to safeguard both the instrument and the device under test. These include overcurrent, overvoltage, overpower, and reverse voltage protection. When a protection fault is triggered, the load input is immediately shut off and the front panel displays the fault condition, which can also be queried remotely.
Which mainframe is required to operate the N3306A module?
The N3306A requires either an N3300A mainframe (single-slot) or an N3301A mainframe (dual-slot) for operation. The mainframe provides power, cooling, and front panel control for the installed load modules. The N3301A can hold two modules for independent two-channel load testing, with each channel individually addressable via GPIB or RS-232.
What input connections does the N3306A use for high-current applications?
The N3306A provides rear panel input binding posts for connecting the device under test, along with a 14-pin control connector for remote sense, monitor outputs, and external programming signals. For high-current applications, an optional 8mm screw terminal connector (Option UJ1) is available to ensure secure, low-resistance connections that minimize heating at the connection point.
